#!/bin/bash
# 跑所有已调通的 P0 必测用例,累积出一份合并报告。
# 规则:ADD 阶段跑完后,失败的添加在进 CONTROL 前再重试最多 2 次;2 次仍失败则放弃、继续后续用例。
# SOAK_MODE=1:跨多次 vitest run 累积到 reports/.results.json,末尾 gen-combined 出报告。
set -u
cd /Users/woan/Desktop/AI_UIAutomation
LOG=reports/p0-all.log
export PLATFORM=android SOAK_MODE=1 SKIP_PROTO_NET=1
export LOCK_DEVICE="Lock 6D" LOCK_PRO_DEVICE="Lock Pro DE" PLUG_CTRL_DEVICE="Plug Mini" BT_DEVICE="Blind Tilt 42"

rm -f reports/.results.json

# 添加命令(含各设备专属 env);灯类/EU plug 用品类入口区分
ADD_CMDS=(
  "npx vitest run tests/bot/bot_connect.test.ts"
  "npx vitest run tests/meter/meter_connect.test.ts"
  "npx vitest run tests/meter/meter_plus_connect.test.ts"
  "npx vitest run tests/meter/outdoor_meter_connect.test.ts"
  "npx vitest run tests/meter/meter_pro_connect.test.ts"
  "npx vitest run tests/sensor/motion_sensor_connect.test.ts"
  "npx vitest run tests/sensor/presence_sensor_connect.test.ts"
  "npx vitest run tests/remote/remote_connect.test.ts"
  "npx vitest run tests/curtain/curtain_connect.test.ts"
  "CURTAIN_DEVICE='Curtain3 2B' npx vitest run tests/curtain/curtain_connect.test.ts"
  "npx vitest run tests/curtain/curtain3_2025_connect.test.ts"
  "npx vitest run tests/water_detector/water_detector_connect.test.ts"
  "npx vitest run tests/hub/hub_matter_connect.test.ts"
  "npx vitest run tests/find_card/find_card_connect.test.ts"
  "npx vitest run tests/safety_alarm/safety_alarm_connect.test.ts"
  "PLUG_MINI_CATEGORY='Plug Mini (JP)' PLUG_MINI_RELAY=plug_mini npx vitest run tests/plug/plug_mini_connect.test.ts"
  "PLUG_MINI_CATEGORY='Plug Mini (US)' PLUG_MINI_RELAY=plug_mini_us npx vitest run tests/plug/plug_mini_connect.test.ts"
  "PLUG_MINI_CATEGORY='Plug Mini (EU)' PLUG_MINI_RELAY=plug_mini_eu PLUG_MINI_ONES=332918 npx vitest run tests/plug/plug_mini_connect.test.ts"
  "npx vitest run tests/color_bulb/color_bulb_connect.test.ts"
  "npx vitest run tests/ceiling_light/ceiling_light_pro_connect.test.ts"
  "npx vitest run tests/strip_light/strip_light_connect.test.ts"
  "npx vitest run tests/ceiling_light/floor_lamp_connect.test.ts"
  "npx vitest run tests/ceiling_light/color_floor_lamp_connect.test.ts"
  "npx vitest run tests/strip_light/neon_light_connect.test.ts"
  "npx vitest run tests/keypad/keypad_vision_connect.test.ts"
  "npx vitest run tests/keypad/keypad_touch_connect.test.ts"
  "npx vitest run tests/aihub/aihub_connect.test.ts -t '通过BLE添加'"
  "npx vitest run tests/air_purifier/air_purifier_connect.test.ts"
  "npx vitest run tests/humidifier/humidifier2_connect.test.ts"
  "npx vitest run tests/ceiling_light/eave_light_connect.test.ts"
  "npx vitest run tests/urc/urc_connect.test.ts"
  "npx vitest run tests/hub/relay_switch_connect.test.ts"
  "npx vitest run tests/hub/hub3_connect.test.ts"
  "npx vitest run tests/aihub/ai_art_frame_connect.test.ts"
  "npx vitest run tests/sensor/contact_sensor_connect.test.ts"
  "npx vitest run tests/camera/doorbell_connect.test.ts"
)
CONTROL=(
  "npx vitest run tests/meter/meter_control.test.ts"
  "npx vitest run tests/bot/bot_card.test.ts"
  "npx vitest run tests/lock/lock_card.test.ts"
  "npx vitest run tests/curtain/curtain_control.test.ts"
  "npx vitest run tests/plug/plug_mini_control.test.ts"
  "npx vitest run tests/curtain/blind_tilt_control.test.ts"
  "npx vitest run tests/humidifier/humidifier2_card.test.ts"
  "npx vitest run tests/air_purifier/air_purifier_card.test.ts"
  "npx vitest run tests/ceiling_light/eave_light_control.test.ts"
)
TAIL=(
  "STREAM_HOLD_MS=60000 npx vitest run tests/camera/camera_stream.test.ts"
  "npx vitest run tests/platform/feedback.test.ts"
  "npx vitest run tests/platform/rn_plugin.test.ts"
  "npx vitest run tests/platform/create_room.test.ts"
  "npx vitest run tests/platform/message_center.test.ts"
  "npx vitest run tests/platform/scene_operation.test.ts"
  "npx vitest run tests/auth/third_party_login.test.ts"
  "npx vitest run tests/auth/eu_login.test.ts"
  "npx vitest run tests/auth/register.test.ts"
  "npx vitest run tests/auth/forgot_password.test.ts"
  "npx vitest run tests/auth/delete_account.test.ts"
  "npx vitest run tests/auth/login.test.ts"
)

# 跑一条命令,过滤出结果行;含 "✗ [FAIL]" 视为失败(返回1),否则0(PASS/SKIP)
run_one() {
  local cmd="$1" tmp
  tmp=$(mktemp)
  eval "$cmd" > "$tmp" 2>&1
  grep -E '✓ \[PASS\]|✗ \[FAIL\]|○ \[SKIP\]|结果:' "$tmp" | tail -12
  if grep -q '✗ \[FAIL\]' "$tmp"; then rm -f "$tmp"; return 1; fi
  rm -f "$tmp"; return 0
}

# 恢复手机 WiFi(BLE 控制阶段关了 WiFi)→ 打开并验证 wlan0 拿到 IP(联网成功),最多重试 5 次。
restore_wifi() {
  for i in 1 2 3 4 5; do
    adb shell svc wifi enable >/dev/null 2>&1
    sleep 8
    if adb shell ip addr show wlan0 2>/dev/null | grep -q "inet "; then
      echo "[WiFi] 已恢复联网(第${i}次)"; return 0
    fi
    echo "[WiFi] 未联网,重试 ${i}/5..."; sleep 5
  done
  echo "[WiFi] WARN: 多次重试仍未恢复 WiFi,后续 WiFi 控制/平台/账号用例可能失败"
  return 1
}

{
echo "===== $(date '+%F %T') P0 全量回归开始 ====="

echo "----- 复位:跳过(用户已手动删除全部待添加设备;摄像头/门铃等保留不动)-----"
# 注:摄像头(Indoor Cam/Pan-Tilt/Outdoor Spotlight Cam/Video Doorbell)拉流用例需要,绝不可删。
# RESET_EXCEPT=1 KEEP_DEVICES="Lock 6D,Lock Pro DE,Blind Tilt 42" npx ts-node scripts/reset-except.ts 2>&1 | tail -5 || echo "复位异常(继续跑)"

echo "----- ADD 阶段 -----"
FAILED=()
for cmd in "${ADD_CMDS[@]}"; do
  echo "--- $(date +%T) $cmd ---"
  run_one "$cmd" || { echo "[ADD-FAIL] $cmd"; FAILED+=("$cmd"); }
done

# 规则:失败的添加,进 CONTROL 前重试最多 2 次;仍失败则放弃
if [ ${#FAILED[@]} -gt 0 ]; then
  echo "===== 添加失败 ${#FAILED[@]} 个,重试(每个最多2次)====="
  STILL=()
  for cmd in "${FAILED[@]}"; do
    ok=0
    for att in 1 2; do
      echo "--- 重试 $att/2: $cmd ---"
      if run_one "$cmd"; then ok=1; echo "[RETRY-OK] $cmd"; break; fi
    done
    [ $ok -eq 0 ] && { echo "[RETRY-GIVEUP] $cmd"; STILL+=("$cmd"); }
  done
  echo "重试后仍失败 ${#STILL[@]} 个(已放弃,继续后续用例)"
fi

echo "----- CONTROL 阶段(BLE + WiFi 各跑一遍,分别打 15975/15974 锚点)-----"
# BLE 阶段:关手机 WiFi 强制 BLE 直连控制
adb shell svc bluetooth enable >/dev/null 2>&1
adb shell svc wifi disable >/dev/null 2>&1; sleep 5
export PROTO=ble
echo "===== 控制 PROTO=ble(手机 WiFi 已关)====="
for cmd in "${CONTROL[@]}"; do echo "--- $(date +%T) [ble] $cmd ---"; run_one "$cmd" || true; done

# 关键:BLE 控制完成后恢复手机 WiFi(带重试)。没 WiFi 后续 WiFi 控制+平台+账号都会挂。
restore_wifi

export PROTO=wifi
echo "===== 控制 PROTO=wifi(手机 WiFi 已恢复)====="
for cmd in "${CONTROL[@]}"; do echo "--- $(date +%T) [wifi] $cmd ---"; run_one "$cmd" || true; done
unset PROTO
restore_wifi  # 进平台/账号前再确保 WiFi 在线

echo "----- 平台 + 账号阶段 -----"
for cmd in "${TAIL[@]}"; do echo "--- $(date +%T) $cmd ---"; run_one "$cmd" || true; done

echo "----- 生成合并报告 -----"
npx ts-node scripts/gen-combined.ts P0_All_Android
echo "===== $(date '+%F %T') 完成 ====="
} >> "$LOG" 2>&1