#!/bin/bash
# iOS 添加用例批量调试:每个用例前用 WDA terminate/launch 复位到首页,跑完记录结果。
# WDA 须已在 localhost:8100。失败不阻塞,继续下一个。
set -u
cd "$(dirname "$0")/.."
export PLATFORM=ios SOAK_MODE=1
BUNDLE=com.wohand.wohand
LOG=reports/ios-adds.log
: > "$LOG"
# iOS 阶段起点:清空 .results.json,使 iOS 合并报告(iOSAdds/iOSAll)只含 iOS 结果。
# 否则会 append 到 Android 阶段(run-p0-all 跑完未清)的记录后 → iOSAll 把 Android 的 ble/wifi 记录一并计入(总数虚高,如 267)。
# 仅在此清(iOS 阶段开头);run-ios-controls 不清,以便 iOSAll 含「添加+控制」全程 iOS 结果。
rm -f reports/.results.json

# WDA 健康检查 + 恢复:/status 不通则重启 iproxy 端口转发(覆盖过夜端口转发断开;设备上 WDA 进程仍在即恢复)。
ensure_wda(){
  for t in 1 2 3; do
    curl -s --max-time 5 http://localhost:8100/status 2>/dev/null | grep -q '"ready"' && return 0
    echo "[wda] /status 不通,重启 iproxy(第 $t 次)..." | tee -a "$LOG"
    pkill -f "iproxy 8100" 2>/dev/null; sleep 1
    local udid; udid=$(idevice_id -l 2>/dev/null | head -1)
    nohup iproxy 8100 8100 -u "$udid" >/dev/null 2>&1 &
    sleep 5
  done
  curl -s --max-time 5 http://localhost:8100/status 2>/dev/null | grep -q '"ready"' && return 0
  echo "[wda] !! WDA 仍不可达(设备上 WDA 进程可能已退出,需手动重启 WDA)" | tee -a "$LOG"; return 1
}

reset_home(){
  ensure_wda || return 1
  local sid
  sid=$(curl -s --max-time 5 http://localhost:8100/status 2>/dev/null | grep -oE '"sessionId" *: *"[^"]*"' | sed 's/.*"\([^"]*\)"$/\1/')
  [ -z "$sid" ] && { echo "[reset] 无 WDA session(WDA 掉了?)" | tee -a "$LOG"; return 1; }
  curl -s -X POST "http://localhost:8100/session/$sid/wda/apps/terminate" -H 'Content-Type: application/json' -d "{\"bundleId\":\"$BUNDLE\"}" >/dev/null 2>&1
  sleep 1
  curl -s -X POST "http://localhost:8100/session/$sid/wda/apps/launch" -H 'Content-Type: application/json' -d "{\"bundleId\":\"$BUNDLE\"}" >/dev/null 2>&1
  sleep 3
}

# iOS 全量添加清单(对齐 Android run-p0-all.sh 的 ADD,补 iOS 专属差异):
#  - plug 三区域加 PLUG_OTHER_PAIRING=1(iOS 配对后弹 "Add to HomeKit",需点 Other Pairing → Yes 才进配网)
#  - WiFi 已统一用 Android 配置(ASUS_30),由 PLATFORM=ios + wifi.config 回落自动生效
#  - 锁/摄像头(含 doorbell 视频门铃)添加跳过:iOS 需扫码/校准无方案(控制类已另覆盖)
ADDS=(
  # —— BLE(物理接继电器口,不配网) ——
  "bot|npx vitest run tests/bot/bot_connect.test.ts"
  "meter|npx vitest run tests/meter/meter_connect.test.ts"
  "meter_plus|npx vitest run tests/meter/meter_plus_connect.test.ts"
  "outdoor_meter|npx vitest run tests/meter/outdoor_meter_connect.test.ts"
  "meter_pro|npx vitest run tests/meter/meter_pro_connect.test.ts"
  "motion_sensor|npx vitest run tests/sensor/motion_sensor_connect.test.ts"
  "presence_sensor|npx vitest run tests/sensor/presence_sensor_connect.test.ts"
  "contact_sensor|npx vitest run tests/sensor/contact_sensor_connect.test.ts"
  "remote|npx vitest run tests/remote/remote_connect.test.ts"
  "find_card|npx vitest run tests/find_card/find_card_connect.test.ts"
  "safety_alarm|npx vitest run tests/safety_alarm/safety_alarm_connect.test.ts"
  "water_detector|npx vitest run tests/water_detector/water_detector_connect.test.ts"
  "curtain|npx vitest run tests/curtain/curtain_connect.test.ts"
  "curtain3_2b|CURTAIN_DEVICE='Curtain3 2B' CURTAIN_CALIBRATE=1 npx vitest run tests/curtain/curtain_connect.test.ts"
  "curtain3_2025|CURTAIN_CALIBRATE=1 npx vitest run tests/curtain/curtain3_2025_connect.test.ts"
  "keypad_vision|npx vitest run tests/keypad/keypad_vision_connect.test.ts"
  "keypad_touch|npx vitest run tests/keypad/keypad_touch_connect.test.ts"
  # —— WiFi Hub 类 ——
  "hub_mini|npx vitest run tests/hub/hub_connect.test.ts"
  "hub_matter|npx vitest run tests/hub/hub_matter_connect.test.ts"
  "hub3|npx vitest run tests/hub/hub3_connect.test.ts"
  "hub_plus|npx vitest run tests/hub/hub_plus_connect.test.ts"
  "relay_switch|npx vitest run tests/hub/relay_switch_connect.test.ts"
  "aihub|npx vitest run tests/aihub/aihub_connect.test.ts -t '通过BLE添加'"
  "ai_art_frame|npx vitest run tests/aihub/ai_art_frame_connect.test.ts"
  # —— 插座(iOS 需 Other Pairing → Yes) ——
  "plug_jp|PLUG_OTHER_PAIRING=1 PLUG_MINI_CATEGORY='Plug Mini (JP)' PLUG_MINI_RELAY=plug_mini npx vitest run tests/plug/plug_mini_connect.test.ts"
  "plug_us|PLUG_OTHER_PAIRING=1 PLUG_MINI_CATEGORY='Plug Mini (US)' PLUG_MINI_RELAY=plug_mini_us npx vitest run tests/plug/plug_mini_connect.test.ts"
  "plug_eu|PLUG_OTHER_PAIRING=1 PLUG_MINI_CATEGORY='Plug Mini (EU)' PLUG_MINI_RELAY=plug_mini_eu PLUG_MINI_ONES=332918 npx vitest run tests/plug/plug_mini_connect.test.ts"
  # —— 环境类 ——
  "humidifier2|npx vitest run tests/humidifier/humidifier2_connect.test.ts"
  "air_purifier|npx vitest run tests/air_purifier/air_purifier_connect.test.ts"
  # —— 灯类(WiFi 配网 + 浮层) ——
  "color_bulb|npx vitest run tests/color_bulb/color_bulb_connect.test.ts"
  "ceiling_pro|npx vitest run tests/ceiling_light/ceiling_light_pro_connect.test.ts"
  "strip_light|npx vitest run tests/strip_light/strip_light_connect.test.ts"
  "floor_lamp|npx vitest run tests/ceiling_light/floor_lamp_connect.test.ts"
  "color_floor_lamp|npx vitest run tests/ceiling_light/color_floor_lamp_connect.test.ts"
  "neon|npx vitest run tests/strip_light/neon_light_connect.test.ts"
  "strip_light_3|npx vitest run tests/strip_light/strip_light_3_connect.test.ts"
  "eave_light|npx vitest run tests/ceiling_light/eave_light_connect.test.ts"
  "urc|npx vitest run tests/urc/urc_connect.test.ts"
  # —— 扫地机 ——
  "robot_s1p|npx vitest run tests/robot/robot_s1p_connect.test.ts"
  "robot_s10|npx vitest run tests/robot/robot_s10_connect.test.ts"
  # —— 摄像头/门铃添加(iOS 需扫码/校准无方案;账号已保留这两设备 → 多为已存在 SKIP,纳入为对齐 Android P0 口径)——
  "doorbell|npx vitest run tests/camera/doorbell_connect.test.ts"
  "outdoor_ptc|npx vitest run tests/camera/outdoor_ptc_connect.test.ts"
)

echo "===== $(date '+%F %T') iOS 添加批量开始 =====" | tee -a "$LOG"

# 可选:跑前清空设备(保留锁/摄像头/门铃等不可重加),让添加用例真正执行(否则已存在→SKIP)。
# 过夜全量验证用 RESET_FIRST=1;默认关(避免误删)。
if [ "${RESET_FIRST:-0}" = "1" ]; then
  echo "[reset-except] 清空可重加设备(保留 Lock/Cam/Doorbell/Blind Tilt)..." | tee -a "$LOG"
  reset_home
  RESET_EXCEPT=1 PLATFORM=ios npx ts-node scripts/reset-except.ts >> "$LOG" 2>&1 \
    && echo "[reset-except] 完成" | tee -a "$LOG" \
    || echo "[reset-except] 异常(继续跑添加)" | tee -a "$LOG"
fi

# 跑单条添加:复位→执行→打印;含 "✗ [FAIL]" 返回 1(SKIP/已存在不算失败,不重试)。
run_add_one() {
  local name="$1" cmd="$2"
  echo "----- $(date +%T) [$name] -----" | tee -a "$LOG"
  reset_home
  eval "$cmd" > /tmp/ios-add-one.log 2>&1
  grep -E '✓ \[PASS\]|✗ \[FAIL\]|○ \[SKIP\]|结果:|relay:|未触发|not found|cannot|品类' /tmp/ios-add-one.log | grep -ivE "deprecat" | tail -6 | tee -a "$LOG"
  grep -q '✗ \[FAIL\]' /tmp/ios-add-one.log && return 1 || return 0
}

FAILED=()
for entry in "${ADDS[@]}"; do
  name="${entry%%|*}"; cmd="${entry#*|}"
  run_add_one "$name" "$cmd" || FAILED+=("$entry")
done
# 添加失败重试(对齐 Android run-p0-all:每个最多重试 2 次;WiFi 抖动/BLE 扫描漏常一次过)
if [ ${#FAILED[@]} -gt 0 ]; then
  echo "===== iOS 添加失败 ${#FAILED[@]} 个,重试(每个最多2次)=====" | tee -a "$LOG"
  for entry in "${FAILED[@]}"; do
    name="${entry%%|*}"; cmd="${entry#*|}"; ok=0
    for att in 1 2; do
      echo "--- 重试 $att/2: [$name] ---" | tee -a "$LOG"
      if run_add_one "${name}-retry${att}" "$cmd"; then ok=1; echo "[ADD-RETRY-OK] $name" | tee -a "$LOG"; break; fi
    done
    [ $ok -eq 0 ] && echo "[ADD-RETRY-GIVEUP] $name" | tee -a "$LOG"
  done
fi
echo "===== $(date '+%F %T') 完成 =====" | tee -a "$LOG"

# 汇总逐用例 HTML 报告(SOAK_MODE 已累计到 reports/.results.json)
TS=$(date +%Y%m%d-%H%M%S)
npx ts-node scripts/gen-combined.ts "iOSAdds_$TS" >> "$LOG" 2>&1 \
  && echo "逐用例报告: reports/iOSAdds_${TS}_*.html" | tee -a "$LOG" \
  || echo "报告生成失败(见 $LOG)" | tee -a "$LOG"